Industry
Corporate
Floor-by-floor horizontal cabling, fiber risers and IDF build-outs for Midtown and FiDi offices, like the network infrastructure we built at 3 Times Square.
Talk to us about your corporate projectLow-Voltage Cabling Installation in New York City
Cat6A and fiber, pre-wire for office build-outs, rack and IDF work, and security and AV cabling for buildings across Manhattan, Brooklyn, Queens, the Bronx and Staten Island. Certified, documented and installed by DIST's New York crews.
20+Years of experience
85+Skilled technicians
4.9/5Google review rating
As featured in
NYC Cabling & Infrastructure Projects: See Our Work
Tell us about the building
Drawings if you have them, the number of drops or rooms, the address, whether the floor is under construction or occupied, and your timeline are enough to start. We come back with a count and a quote.
“We solve AV and IT challenges with passion, speed & integrity. Happy to sit on a call to discuss your AV and IT needs.”
- Call(212) 206-0794
- Email[email protected]
- HoursMon–Fri 8:00 AM – 5:00 PM
- OfficesNew York City · Miami
Low-Voltage Cabling
Services in NYC
Pathways, cable, racks and termination designed together, so every system that rides on the cabling works on day one and ten years from now.
Structured cabling: Cat6, Cat6A & fiber
Horizontal and backbone cabling designed to TIA standards and certified with a test report for every drop, so the network you pay for on a Manhattan floor plate is the network you get.
Rack, IDF & riser build-outs
Racks, patch panels, cable management and power assembled, dressed and labeled in your IDFs and riser closets, so any technician can trace a port in seconds, years from now.
Security & access control cabling
Cabling for cameras, door readers, locks, intercoms and alarm panels, run and terminated so the security integrator, often us, can commission on day one.
Pre-wire & rough-in for build-outs
Pathways, conduit, boxes and cable pulled while walls and ceilings are open, coordinated with your GC, architect and the base-building engineer so nothing is cut open later.
Bandwidth upgrades & retrofits
Cat6A and fiber upgrades in occupied towers, re-termination and certification of existing runs, and rack cleanups that end cable chaos, with cutovers after hours.
AV, Wi-Fi & automation cabling
Speaker wire, HDMI and HDBaseT, display drops, access point runs and control wiring for lighting and shades, planned alongside the AV design for the room.
How We Plan a Cabling Project in New York
We work through these four points with you during design, before the first cable is pulled.
Standards & certification
TIA-568 design, manufacturer-certified components and a printed test report for every link at handover.
NYC pathways & code
Plenum ratings, firestopping, conduit fill and separation from power handled correctly, with building rules and inspections in mind from the first drawing.
Labeling & documentation
Every cable, port and panel labeled to one scheme, with as-built drawings so future moves and adds take minutes.
Schedule & building access
Rough-in, trim and testing sequenced with the construction schedule, freight elevator bookings and after-hours windows in occupied towers.
Project spotlight
Enterprise cabling and network at 3 Times Square
- Client
- 3 Times Square
- Location
- Midtown Manhattan, NY
- Delivered
- Structured cabling, network & conference rooms
“Our conference room setup is such a game changer thanks to [DIST]. The AI camera and mic make meetings feel effortless.”See the project
Industries We Serve
Cabling designed for how each New York building is used and what will run on it.
Our Cabling
Installation Process
Twenty drops or two thousand, the sequence is the same, and every step accounts for how New York buildings actually operate.
Drawings & building walk
We review architectural and MEP drawings, walk the floor and count every drop, pathway and rack location, and confirm riser access and freight rules with the building engineer.
Design & submittals
Cable schedule, pathway plan, rack elevations and labeling scheme, submitted for landlord approval with a fixed, itemized quote.
Rough-in
Pathways, conduit, boxes and cable pulled while the space is open, sequenced with the GC schedule.
Trim & termination
Faceplates, patch panels and racks terminated and dressed after finishes are in, with every cable labeled.
Testing & certification
Every copper link and fiber strand tested to spec, with a certification report delivered at handover.
As-builts & local support
Drawings, port maps and photos handed over, then our SoHo-based field team handles moves, adds and changes as the office evolves.
Cabling Support & Changes in NYC
DIST field crews from our SoHo office handle the moves, adds and changes that follow every fit-out, and our help desk answers 24/7 when a link goes down.
- Moves, adds and changes on request
- Re-termination, testing and re-certification
- Rack cleanups and cable re-dressing
- Emergency repairs after damage or renovation
- As-built updates and port documentation
- Support for cabling installed by other contractors
24/7 help desk(212) 206-0794
Have drawings for a New York build-out or a rack that needs rescuing? Send them over and we will count the drops and quote it.
Projects across New YorkCabling & Infrastructure
Cabling & Infrastructure
Projects in NYC
3 Times Square
Conference room technology with AI cameras, projection and enterprise network infrastructure.
Well & Durst
A 59-foot LED video wall for town halls and seminars.
General Motors Building
AV consulting for an 18,381 sq ft amenity renovation.
State of Play
AV, cameras, custom score tracking, control and network infrastructure.
“That massive 59-foot LED wall [DIST] put in has transformed how we run town halls and seminars.”
Ready for infrastructure built to last?
Cabling Brands We Install
Certified components from the brands structured cabling is built on.
Cisco MerakiLevitonPanduitBeldenCorning
Where we work
Cabling Across Manhattan and the Five Boroughs
Midtown & Hudson Yards
Class A towers where every floor needs the same drop standard, like our network infrastructure at 3 Times Square.
Fifth Avenue & SoHo
Flagship retail, showrooms and boutique offices where cabling has to disappear into the finishes.
Financial District
Older towers where riser space, ceiling access and firestopping take extra planning.
Brooklyn & Long Island City
Creative offices, venues and converted industrial spaces with long runs and exposed pathways done neatly.
Our office
DIST New York City
- Address24 Mercer Street, 2nd Floor, Suite 210, New York, NY 10013
- Phone(212) 206-0794
- HoursMon–Fri 8:00 AM – 5:00 PM · 24/7 Help Desk Support
NYC low-voltage cabling questions
Cost, cable categories, building logistics and certification, answered.
How much does structured cabling cost in New York City?
It is usually priced per drop and depends on cable category, run length, pathway difficulty and whether the floor is open or occupied. Fiber risers, racks and conduit are itemized separately. After a walkthrough we send a fixed quote with every drop counted.
Cat6 or Cat6A: which should I install?
Cat6A supports 10 Gbps over the full 100 meters and the higher PoE loads of modern access points and cameras, so we recommend it for new build-outs. Cat6 remains cost-effective for shorter runs and simple office drops. Fiber is used for risers between floors and links between buildings.
Do you work with general contractors on Manhattan build-outs?
Yes. Most of our New York cabling work is on office build-outs and renovations, coordinated with GCs, architects and owner's reps from drawings through punch list. We attend coordination meetings and sequence rough-in and trim with the schedule.
Can you cable an occupied office without disrupting work?
Yes. Upgrades and retrofits are done after hours or in phases, with cutovers scheduled so staff arrive to working connections. We book freight elevators and after-hours access with the building ahead of time.
Do you handle landlord requirements and certificates of insurance?
Yes. We issue COIs naming the landlord and managing agent, submit drawings and scopes for building approval, and coordinate with the base-building engineer on riser access, ceiling access and firestopping.
Is your cabling certified and tested?
Every link is tested with a certified field tester to TIA standards, and you receive the report at handover. We install manufacturer-certified systems that qualify for extended warranties.
Do you also install the network and AV equipment?
Yes. DIST designs and installs the switches, Wi-Fi, cameras, access control, conference rooms and audio the cabling serves, so one team owns the whole system.
Can you clean up an existing rack or IDF?
Yes. We re-dress, re-label and re-terminate existing racks, replace failing patch cords and document every port, usually in a single after-hours visit.
Which areas of New York do you cover for low-voltage cabling?
All five boroughs, including Midtown, Hudson Yards, the Financial District, SoHo, Brooklyn and Long Island City, from our office on Mercer Street in SoHo.
Planning a build-out or a cabling upgrade in New York?
Send us the address, the drawings, the drop count and the timeline. A DIST engineer will walk the floor, then come back with a cable schedule, a sequence and a fixed quote.