
Corporate Lobbies
Brand walls and town-hall screens rolled out to one standard across every location.
Talk to us about your corporate lobbies projectPlan an LED video wall for a lobby, boardroom or venue. Get the wall size in cabinets, the pixel pitch for your viewing distance, and the exact height to mount it.
Get this LED video wall installed at exactly 25" to 119"
Heights are measured from the finished floor to the edge of the picture. Sizes aim for an image height of about the farthest distance ÷ 4 (TV, LED, conference) or ÷ 8 (signage). Conference seating assumes 30" per seat along each side of the table, limited by wall width, ceiling and how close the front row sits. The top edge stays within a 30° look-up from the nearest viewer. Confirm with a site survey before install.
Send the wall size and pixel pitch from the calculator, or a photo of the space. We confirm the structure, power and processing, then send an itemized proposal.

“We solve AV and IT challenges with passion, speed & integrity. Happy to sit on a call to discuss your AV and IT needs.”
Design, structure, installation and calibration from one team, for walls from a few cabinets to a full lobby.

Seamless direct-view LED that greets visitors and shows off the brand, sized for the people walking past.

Bright walls and window displays that change with every campaign, managed from one place.

Mounting frames, power, data and video processors engineered and coordinated with your contractor before anything ships.

Fine-pitch walls for presentations and all-hands meetings, readable from the front row to the back wall.

LED backdrops and stage screens for venues and event halls, configured to switch between shows with a preset.

Players, scheduling and one-touch control so your team changes what's on the wall without calling us.
An LED wall is a structural, electrical and video project at once. We own all three, so it looks seamless on day one and stays that way.
Pitch chosen for your closest viewer, so it looks sharp without paying for pixels nobody can see.
Frames, backing, power and heat load engineered and coordinated before installation day.
Color and brightness matched across every cabinet, so the wall reads as one image.
Remote monitoring, spare modules and engineers on site when a panel needs swapping.
Each space has its own crowd, light and viewing distance. We spec the wall for yours.

Brand walls and town-hall screens rolled out to one standard across every location.
Talk to us about your corporate lobbies projectOne team from survey to calibration, so the wall you sized here is the wall you get.

We measure the wall, viewing distances, ambient light, structure and power, and the route the cabinets take into the building.
Cabinet layout, pixel pitch and processing, with renderings so you see the wall in your space before you buy.
Frames, backing, power and data coordinated with your contractor while walls are open.
Cabinets hung, aligned and seamed by our crews, after hours in occupied spaces.
Color and brightness calibrated across every cabinet, processors configured and your content loaded.
Your team learns the controls, then our help desk and remote monitoring take it from there.
Not sure which pixel pitch or size fits your space? Send us a photo of the wall and we'll spec it.
“That massive 59-foot LED wall [DIST] put in has transformed how we run town halls and seminars.”
Ready for a wall like these?
LED walls, processing and control from the brands the industry runs on.
Each calculator is tuned for its own kind of space.
Divide the distance to the closest viewer in meters by two. That's the largest pitch in millimeters that still looks smooth. A 1.5 mm wall looks smooth from about 10 ft, 2.5 mm from about 16 ft, and 3.9 mm from about 26 ft.
Size it for the farthest viewer. The wall should be about one-quarter of that distance tall for detailed content, and at least one-sixth. A 40 ft room needs a wall around 7–10 ft tall. The calculator rounds to whole cabinets.
Lobby and feature walls usually start 24–36" off the floor. Raise the bottom edge for crowded spaces so heads don't block it. Keep the top edge at least 6" below the ceiling for mounting and service, and within a 30° look-up from the front row.
Cost depends on the wall size, pixel pitch, mounting structure, and video processing. Finer pitches cost more per square foot. Send your numbers from this calculator for a free, itemized quote.
Send us your numbers. A DIST specialist confirms the size, mount and wiring, then sends your quote.